Airtec GmbH & Co. KG has been made aware of an extremely rare situation which could lead to “non-responsive” CYPRES 2 units
A tored CYPRES disc was reported.
Double check that the CYPRES closing loop is routed through the cutter.
CYPRES 2 from production period during August 2006 to December 2006
Please always observe the complete self test until the “0” appears.
CYPRES was on and operating properly, only the display was blank.
Airtec has managed to incorporate an additional protection again electromagnetic influences. The Silver Sleeve is no longer necessary for new units.
Introduction of the Silver Sleeve to improve electro magnetic shielding.